
Wehooper 915 MHz BPF Board
Wehooper | Part: 915MHz BPF
A tiny PCB filter with ipex input/output. Comes with an ipex jumper.
Comments from the Austin Mesh Community
Specs
Brand
Wehooper
Part Number
915MHz BPF
Filter Type
Bandpass
Connectors
2x u.FL/IPEX
Loss at Meshtastic (906.875 MHz)
1.39 dB
Loss at MeshCore (910.525 MHz)
1.29 dB
Return Loss at Meshtastic
16.1 dB
Return Loss at MeshCore
14.8 dB
3 dB Passband
893.7-938.4 MHz (44.7 MHz)
Dimensions
25 x 15 x 5 mm
Test Results
This page collects 2-port VNA measurements of 2 units of the Wehooper 915 MHz BPF Board, measured firsthand by the mesh community (KG5HZC). Every sweep is charted below and downloadable as a Touchstone (.s2p) file. Measured 3 dB passband is 893.7-938.4 MHz (44.7 MHz wide).
Unit 1
At Mesh Operating Frequencies
Meshtastic (906.875 MHz)
Loss: 1.39 dB
Return loss: 16.1 dB
MeshCore (910.525 MHz)
Loss: 1.29 dB
Return loss: 14.8 dB
3 dB passband: 893.7-938.4 MHz (44.7 MHz wide), minimum loss 1.31 dB at 911.5 MHz.
Out-of-Band Rejection
Notes from test
No notes available
Tested By
Tommy Ekstrand, KG5HZC on 2026-07-11
Sample 2026071101
Unit 2
At Mesh Operating Frequencies
Meshtastic (906.875 MHz)
Loss: 1.49 dB
Return loss: 15.0 dB
MeshCore (910.525 MHz)
Loss: 1.40 dB
Return loss: 14.3 dB
3 dB passband: 893.9-938.5 MHz (44.5 MHz wide), minimum loss 1.40 dB at 922.2 MHz.
Out-of-Band Rejection
Notes from test
No notes available
Tested By
Tommy Ekstrand, KG5HZC on 2026-07-11
Sample 2026071102